Free Cutting Brass Rod
The free-cutting brass products produced by our company are suitable for various structural parts made by hot punching and cutting, as well as automatic lathes and CNC lathes, such as hardware, electrical connectors, and connectors.
Free Cutting Brass Rod Certifications
Free Cutting Brass Rod Performance Advantages
- Good cutting performance and mechanical properties
- Can withstand hot and cold pressure processing
- Good solderability
- Good stability to general corrosion
Free Cutting Brass Rod Application fields
Air Conditioning Connection
Lock cylinder
Free Cutting Brass Rod Performance parameterdownload
| Product name | Grade | chemical composition %，not greater than (except for the remaining amount and range value) | ||||||||||||
| Cu | Pb | Fe | Ni | Sn | Mn | P | Si | AL | Zn | other | Other total impurities | Sum of impurities | ||
| Free cutting brass rod | HPb57-4 | 56.0-58.0 | 3.5-4.5 | 0.5 | 0.5 | margin | 1.2 | |||||||
| HPb58-3 | 57.0～60.0 | 2.0～3.5 | 0.5 | margin | 1.0 | |||||||||
| HPb59-1 | 57.0～60.0 | 0.8～1.9 | 0.5 | margin | 1.0 | |||||||||
| HPb59-2 | 57.0～60.0 | 1.5～2.5 | 0.5 | 0.5 | margin | 1.0 | ||||||||
| HPb60-2 | 58.0～61.0 | 1.5～2.5 | margin | 0.65 | ||||||||||
| HPb60-3 | 58.0～61.0 | 2.5～2.5 | margin | 0.85 | ||||||||||
| HPb61-1 | 58.0～62.0 | 0.6～1.2 | margin | 0.55 | ||||||||||
| HPb58-2A | 56.0～60.0 | 2.0～3.2 | margin | |||||||||||
| HPb59-1B | 57.0～60.0 | 1.0～2.2 | 0.6 | margin | ||||||||||
| HPb58-2C | 54.0～58.0 | 2.0～5.0 | ||||||||||||
| C3771 | 57.0～61.0 | 1.0～2.5 | margin | Fe+Sn1.0 | ||||||||||
| C3601 | 59.0～63.0 | 1.8～3.7 | 0.3 | margin | Fe+Sn0.5 | |||||||||
| C3602 | 59.0～63.0 | 1.8～3.7 | 0.5 | margin | Fe+Sn1.0 | |||||||||
| C3603 | 57.0～61.0 | 1.8～3.7 | 0.35 | margin | Fe+Sn0.6 | |||||||||
| C3604 | 57.0～61.0 | 1.8～3.7 | 0.5 | margin | Fe+Sn1.0 | |||||||||
Free Cutting Brass Rod Production Process
The conventional production process:
Raw material → Melting → Analysis in furnace → Horizontal continuous casting → Sawing → Profile inspection → Wire drawing → Annealing → Finishing → Product inspection → Finished product
Free Cutting Brass Rod Executive Standard
Product performance standards: ASTM B16-2015、EN 12164-2016、JIS H3250-2015、GB/T 26306-2010、Q/JTTY 01-2018
Free Cutting Brass Rod Production Equipments
Smelting workshop
Related Products
The lead-free environmental protection copper rods produced by our company include general brass series, bismuth lead-free series, silicon lead-free series, tin brass series, which can be used in plumbing hardware, water meters, various valves, pipe joints, water supply pipe fittings Water device. It is suitable for automatic lathes and CNC lathes to process a series of products with ecological environmental protection and sanitary safety requirements, such as parts for electronics, telecommunications, electrical connectors, connectors, hardware, photography, home appliances, drinking water engineering. 
The anti-dezincification copper rods produced by our company can be applied to wading devices such as plumbing hardware, water meters, various valves, pipe faucets, water supply pipe fittings and so on. It is suitable for a series of products with ecological environmental protection and sanitary safety requirements; such as parts for household appliances and drinking water projects. Our company has rich production experience for anti-dezincification brass and can provide guidance for your production. 
The range of products that our company can provide to you are: (1) Status: Y2; (2) Diameter: Φ2.0mm-Φ90.0mm; (3) Length: 2m-4.5m. This product can be used in daily hardware, drinking water system and other fields. — Online Contact —
Ms.Yu
电话：19975329387
QQ：2885169920
邮箱：yujl01@jtgroup.com.cn
Ms.Dong
电话：19975329387
QQ：2885169920
邮箱：yujl01@jtgroup.com.cn
Ms.Sun
电话：19975329387
QQ：2885169920
邮箱：yujl01@jtgroup.com.cn
